The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Battery Cable - Crimp or Solder
#9
I was planning on 25 mm although I haven't bought it yet. 

Some have suggested using 35 mm which isn't that much more expensive but I'm a little concerned over flexibility / bend radius as it's for my "Ulsteroid" where the battery box is under the passenger seat.   

There's not much clearance between the front of the battery and the timber support for the front of the passenger seat so at least the live (positive) cable will have to run along in this gap and then turn through 90 degrees to run along the transmission tunnel to the floor starter button so this bend will need to be relatively tight.

John.
Reply


Messages In This Thread
Battery Cable - Crimp or Solder - by John P - 23-04-2020, 12:22 PM
RE: Battery Cable - Crimp or Solder - by Renaud - 23-04-2020, 12:27 PM
RE: Battery Cable - Crimp or Solder - by John P - 23-04-2020, 03:04 PM
RE: Battery Cable - Crimp or Solder - by Bela - 23-04-2020, 03:17 PM
RE: Battery Cable - Crimp or Solder - by John P - 23-04-2020, 03:27 PM
RE: Battery Cable - Crimp or Solder - by Renaud - 23-04-2020, 05:09 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)