13-11-2019, 08:08 PM
Thanks for the reply Ian.
The 26 va exploded diagram shows the float chamber with the two external tubes and, as you state, does not show any screw cover in the capacity well.
The correct float chamber that I have recently fitted to my carb is the flat bottomed type and reading the 26va notes and looking at the illustration which appears to show a flat bottomed chamber, there is mention of a screw cover. I have had a quick look at my float chamber and it does look to have a thread.
I will double check in the daylight.
Thanks again for your help.
Regards
Joe.
The 26 va exploded diagram shows the float chamber with the two external tubes and, as you state, does not show any screw cover in the capacity well.
The correct float chamber that I have recently fitted to my carb is the flat bottomed type and reading the 26va notes and looking at the illustration which appears to show a flat bottomed chamber, there is mention of a screw cover. I have had a quick look at my float chamber and it does look to have a thread.
I will double check in the daylight.
Thanks again for your help.
Regards
Joe.