17-11-2017, 09:15 PM
Hi All, Whether you balance the rods yourself or not the Balancer will still need the rods including shells if fitted & Pistons . this is because half the rod is rotating and the other half including piston is reciprocating and they need to add weights on the Big end journals to replicate this weight for balancing.
My preference is to balance the crank like this then add flywheel and pressure plate and rebalance this means on the second balance only these two items have weight add or removed.
This is just my way of doing it and food for thought
hope this is not to contentious
Colin
My preference is to balance the crank like this then add flywheel and pressure plate and rebalance this means on the second balance only these two items have weight add or removed.
This is just my way of doing it and food for thought
hope this is not to contentious
Colin