25-02-2019, 04:12 PM
8D64A520-0640-44F1-9A66-061BEA0B26A5.jpeg (Size: 53.19 KB / Downloads: 296)
FEA24133-F420-4584-A343-5D4810EA0476.jpeg (Size: 54.55 KB / Downloads: 293)
9FF8A12E-B31C-48A1-A49F-59AA4156C38C.jpeg (Size: 44.52 KB / Downloads: 293)
76DCB9EB-ADF9-4307-836C-1ABC5DDD1939.jpeg (Size: 45.7 KB / Downloads: 291)
Spent this morning trial fitting the newly made door locks and adjusting the outer edges of the doors to be a snug fit against the body shell.
It was a good idea to have an overlap door, plus the added bead , riveted on , allowed me to bend the beaded edge to neaten up the fit.
It will now all need dismantled, with some stuff to do to improve the interior look. The trim cards need packed out at the front corner to match the other interior cards.
With the weather picking up I’m nearly at the stage to do the final body prep, scotchbriting etc and then spray on the Nyalic lacquer. Then I can do the final polishing on the locks etc and nickel plate them.
Hoping Duncan approves of the door fit!
Regards
Bill G
Sent from my iPhone
Based near the Scottish Border,