07-11-2018, 09:53 PM
GH
72D54B67-311A-456E-8D17-49AB28468E0E.jpeg (Size: 37.69 KB / Downloads: 566)
95158376-2D0F-45E0-8EAF-DE39E234860B.jpeg (Size: 79.69 KB / Downloads: 564)
0FE388C9-33AE-4593-A4B5-492AEFF76361.jpeg (Size: 35.04 KB / Downloads: 560)
75CFF341-A839-4B81-AFEC-810A4A82DB34.jpeg (Size: 91.72 KB / Downloads: 563)
Made further progress on body details today.
Decided to put the 13mm alloy bead round the doors to emulate
the fabric piping on original fabric bodied Cups.
Rivetted the beading on using a jig made from an old pair of Molegrips
with 1/8” flush csk alloy rivets.
I’ve mounted the numberplate and lamps
slightly higher to keep them clear of road muck
And at a height where following modern motorists are
used to looking!
Hope to do the other door tomorrow.
Regards
Bill G
(Aka AllAlloyCup)




Made further progress on body details today.
Decided to put the 13mm alloy bead round the doors to emulate
the fabric piping on original fabric bodied Cups.
Rivetted the beading on using a jig made from an old pair of Molegrips
with 1/8” flush csk alloy rivets.
I’ve mounted the numberplate and lamps
slightly higher to keep them clear of road muck
And at a height where following modern motorists are
used to looking!
Hope to do the other door tomorrow.
Regards
Bill G
(Aka AllAlloyCup)
Based near the Scottish Border,