09-09-2018, 08:45 PM
Well done so far, that's some lovely work on making the tooling. You have skills.
It looks like you have some juddering on the cutting surface from having so few cutting heads?
A seat cutter will have around 20 cutting heads.
Also A pickervant kit usually gives you a grinding head, it may be worth buying one of these on its own to grind back the judder.
Also Austins recomendations is the seat head should be no more then 2mm.
The pickervant set usually gives you two cutting angles, one for the seat. And one to cut the excess at another angle.
Hope this helps, Tony.
It looks like you have some juddering on the cutting surface from having so few cutting heads?
A seat cutter will have around 20 cutting heads.
Also A pickervant kit usually gives you a grinding head, it may be worth buying one of these on its own to grind back the judder.
Also Austins recomendations is the seat head should be no more then 2mm.
The pickervant set usually gives you two cutting angles, one for the seat. And one to cut the excess at another angle.
Hope this helps, Tony.