Yesterday, 01:25 PM
I think i may have found a source for this top hat jet seat mow Thanks
Now my concern is the throttle butterfly plate. One side is slightly worn away at the spindle entry point to the body.
Ive tried Burlen but they dont have new ones. Im considering silver soldering and then filling back to a close approximation.
I think the damage to the plate is caused by the poor fit of the spindle due to wear at its bearing surface. I can possibly insert bushes.
Any advice welcome
Now my concern is the throttle butterfly plate. One side is slightly worn away at the spindle entry point to the body.
Ive tried Burlen but they dont have new ones. Im considering silver soldering and then filling back to a close approximation.
I think the damage to the plate is caused by the poor fit of the spindle due to wear at its bearing surface. I can possibly insert bushes.
Any advice welcome