18-05-2018, 11:33 AM
That is a common symptom of mixing Borg and Beck and Newton Bennett type clutch parts in my experience Charles. Often done as they appear interchangeable and work on the bench.
|
Clutch plates
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Clutch plates - by bobthompson - 16-05-2018, 01:36 PM
RE: Clutch plates - by bobthompson - 17-05-2018, 08:39 AM
RE: Clutch plates - by Chris KC - 17-05-2018, 08:50 AM
RE: Clutch plates - by Bob Culver - 17-05-2018, 09:03 AM
Clutch slow to ingauge - by muzza - 17-05-2018, 12:01 PM
RE: Clutch slow to ingauge - by Robert Leigh - 17-05-2018, 01:23 PM
RE: Clutch plates - by squeak - 17-05-2018, 02:22 PM
RE: Clutch plates - by Charles Levien - 17-05-2018, 07:18 PM
RE: Clutch plates - by squeak - 17-05-2018, 11:45 PM
RE: Clutch plates - by Charles Levien - 18-05-2018, 11:24 AM
RE: Clutch plates - by bobthompson - 17-05-2018, 07:25 PM
RE: Clutch plates - by Ruairidh Dunford - 17-05-2018, 11:53 PM
RE: Clutch plates - by Bob Culver - 18-05-2018, 09:53 AM
RE: Clutch plates - by AustinWood - 18-05-2018, 11:06 AM
RE: Clutch plates - by Ruairidh Dunford - 18-05-2018, 11:33 AM
RE: Clutch plates - by Charles Levien - 18-05-2018, 11:42 AM
RE: Clutch plates - by Colin Wilks - 29-01-2019, 08:27 PM
RE: Clutch plates - by Zetomagneto - 29-01-2019, 11:08 PM
RE: Clutch plates - by Nick Turley - 30-01-2019, 01:36 AM
RE: Clutch plates - by Zetomagneto - 30-01-2019, 10:36 PM
RE: Clutch plates - by dickie65 - 30-01-2019, 10:44 PM
RE: Clutch plates - by Colin Wilks - 30-01-2019, 10:55 PM
|
Users browsing this thread: 1 Guest(s)