+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: sports angle steering column historic modification (/showthread.php?tid=7675)
sports angle steering column historic modification - JonE - 29-06-2022
I've got a saloon steering box steel casting historically-modified by removal of the rear foot to lower it to sports angle without a big chassis wedge as per the specials.
With a tiny wedge under the front end , it gives one attachment point at the front, which presumably needs redrilling at a subtly changed angle.
Has anyone got similar in use? i.e. Is it strong enough for use, noting that it also has the chassis side connection for the foot brake?
If it isn't, are there any other chassis connections that can somehow be made to keep it in use?
RE: sports angle steering column historic modification - Austin in the Shed - 29-06-2022
Can't you weld another foot on to the rear to pick up the other hole Jon ?
RE: sports angle steering column historic modification - Peter Naulls - 29-06-2022
Yes Jon, this is one of the many slightly dodgy modifications I made to my low-budget special when I built it 35 years ago!
However it has stood the test of time with no problems. It has the advantage of keeping the brake pivot in the same place, rather than the wedge method that pushes the brake pedal higher up into the cabin.
RE: sports angle steering column historic modification - JonE - 29-06-2022
Thanks both.
I could indeed weld on the steel, but of course that is something extra to do and I don't have a welder.
I'd be interested to know whether yours was steel or aluminium, Peter?
RE: sports angle steering column historic modification - Peter Naulls - 30-06-2022
I'll check tonight but fairly sure it's steel.
RE: sports angle steering column historic modification - Peter Naulls - 30-06-2022
Just checked, it's aluminium.
RE: sports angle steering column historic modification - JonE - 30-06-2022
ah - well that's good news, if the weaker aluminium one can work just with one hole (presuming you haven't welded a new tab). Thanks.
RE: sports angle steering column historic modification - Howard Wright - 30-06-2022
Hi Jon
It would be worthwhile ensuring that the column is held firmly under the dash.
Cheers
Howard