14-08-2017, 07:01 AM
Had the same problem a couple of years ago, was advised by our friend north of the border that they would go on with a little persuation, I used a piece of pipe, heat and a big hammer. He was correct.
Two weeks ago I had to strip it all down due to the bearing lip disintergrating. I found that it was even more difficult to get them off. I am asking for advice as to it would be a sensible thing to do to take a few microns off with some wet and dry before reassembly?.
Two weeks ago I had to strip it all down due to the bearing lip disintergrating. I found that it was even more difficult to get them off. I am asking for advice as to it would be a sensible thing to do to take a few microns off with some wet and dry before reassembly?.
I am always interested in any information about Rosengart details or current owners.