12-11-2017, 04:39 PM
(This post was last modified: 12-11-2017, 04:42 PM by AustinWood.)
The radius arm ball joint does not need to be moved.
The castor is corrected by using a flat front spring in place of the standard curved one. This takes the modified radius arms back to the correct position.
There are pictures of the lowered front end on the internet.
eg https://www.pinterest.co.uk/pin/356980707937391114/
The castor is corrected by using a flat front spring in place of the standard curved one. This takes the modified radius arms back to the correct position.
There are pictures of the lowered front end on the internet.
eg https://www.pinterest.co.uk/pin/356980707937391114/
Jim