The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Magneto shaft at standstill
#14
Photo 
[attachment=7804]GENTLEMEN
Better to be born lucky than rich.  Returned home.  Took off the front timing gear cover to discover the woodruff key for the crankshaft drive gear sitting on the sill.  


How it got out is something I am studying. Right now I am minded to think that it has something to do with the lack of a lock washer on the starting nut.  There is to me an ill fitting washer which does not look right.  

Also, I would have thought the crankshaft gear would be flush with the crankshaft itself but it produces out by a quarter of an inch.  

I have learned that the gears are in any event somewhat problematic and so I will try and replace all four plus keys.  

[attachment=7800][attachment=7801][attachment=7802][attachment=7803]

William Cuddy
Reply


Messages In This Thread
Magneto shaft at standstill - by WHCC - 13-09-2019, 05:31 PM
RE: Magneto shaft at standstill - by Charles P - 13-09-2019, 05:43 PM
RE: Magneto shaft at standstill - by WHCC - 13-09-2019, 05:56 PM
RE: Magneto shaft at standstill - by Charles P - 13-09-2019, 06:24 PM
RE: Magneto shaft at standstill - by Robert Leigh - 13-09-2019, 07:00 PM
RE: Magneto shaft at standstill - by Charles P - 13-09-2019, 07:20 PM
RE: Magneto shaft at standstill - by Zetomagneto - 13-09-2019, 09:27 PM
RE: Magneto shaft at standstill - by Colin Reed - 13-09-2019, 09:39 PM
RE: Magneto shaft at standstill - by Charles P - 13-09-2019, 09:47 PM
RE: Magneto shaft at standstill - by Hedd_Jones - 13-09-2019, 10:33 PM
RE: Magneto shaft at standstill - by Tony Press - 13-09-2019, 11:15 PM
RE: Magneto shaft at standstill - by WHCC - 14-09-2019, 07:56 AM
RE: Magneto shaft at standstill - by WHCC - 20-09-2019, 10:36 PM
RE: Magneto shaft at standstill - by WHCC - 21-09-2019, 08:07 AM
RE: Magneto shaft at standstill - by Bob Culver - 21-09-2019, 08:49 AM
RE: Magneto shaft at standstill - by Spex - 21-09-2019, 08:51 AM
RE: Magneto shaft at standstill - by squeak - 21-09-2019, 01:01 PM
RE: Magneto shaft at standstill - by Nick Turley - 21-09-2019, 04:09 PM
RE: Magneto shaft at standstill - by Zetomagneto - 21-09-2019, 07:20 PM
RE: Magneto shaft at standstill - by Colin Reed - 21-09-2019, 09:20 PM
RE: Magneto shaft at standstill - by Adrian Payne - 21-09-2019, 10:16 PM

Forum Jump:


Users browsing this thread: 3 Guest(s)