11-07-2019, 11:04 AM
If you fitted a new silicone gasket (completely dry) and a leak still occurred then I would suggest the block to crankcase gasket is the cause. I have zero leaks after 5k with silicone gasket and original tapper cover.
Do check that the cover is sitting clear of the manifold and crankcase - if held up on these it will never seal.
Leak at the bottom rear indicates that your rearmost block stud may be loose. Tighten it, and others, with extreme caution!
Do check that the cover is sitting clear of the manifold and crankcase - if held up on these it will never seal.
Leak at the bottom rear indicates that your rearmost block stud may be loose. Tighten it, and others, with extreme caution!