24-06-2019, 08:17 PM
Some on the forum love the silicon goo, I cannot use it without finding oil-jet sized blobs in the engine when I come to look inside again.
If you can find a cooking supplies shop they might have the silicon sheets I used before the cherished suppliers produced the sump gaskets.
It is really easy to make gaskets using silicon sheet, particularly if you have hole cutters.
If you don't have hole cutters, sharpen a bit of mild steel tube - it will do well enough for one gasket.
If you can find a cooking supplies shop they might have the silicon sheets I used before the cherished suppliers produced the sump gaskets.
It is really easy to make gaskets using silicon sheet, particularly if you have hole cutters.
If you don't have hole cutters, sharpen a bit of mild steel tube - it will do well enough for one gasket.