22-06-2019, 01:59 PM
(05-06-2019, 09:01 AM)Ian Williams Wrote: Well Tony the spring is completely flat and there is no load on it yet and as I am sure you are aware they settle after being reset, it may end up with less leaves once the car is complete, so just a starting point at present. I had to make a spring wedge to get the castor sensible but thats not unusual, I will post some pictures of how we have stiffened the nose, my car is the same but with a whole lot more complication elsewhere!
Ian would you be able to provide some details regarding how you have adjusted the castor and immobilised one spring shakle on the Nippy axle? I presume you also dropped the radius arm mounting ball as well as the spring wedge.
Many thanks in anticipation.
Bruce