13-05-2019, 09:03 PM
Not a crank timing gear, and bit unclear from your picture but could be dynamo gear, the hole up the centre is about the right size but I can not see the depth of the gear. The pressed steel brackets are very similar to those used to support the rear of the floor on Nippys and Ulsters, I am not familiar with this area on an RP but suggest a similar arrangement is likely. The curved plate maybe part of an original exhaust down pipe to silencer coupling clamp.
As far as I can tell the steel strip with two holes in it is a steel strip with two holes in it, or possibly two holes in a steel strip, sorry stumped on this one!
As far as I can tell the steel strip with two holes in it is a steel strip with two holes in it, or possibly two holes in a steel strip, sorry stumped on this one!
Black Art Enthusiast