24-09-2017, 09:25 PM
(24-09-2017, 09:13 PM)Ian Williams Wrote: Plug the rear of the gallery that feeds along the top of the crankcase to the oil jets, take a pipe out for where the oil pressure gauge was connected, ensure this has a large enough bore! Run the pipe though your external filter housing and back into the front of your oil gallery feeding the jets and front cam bush.
Hi Ian,
Thanks for that. Any help on how and where to plug the rear of the feed gallery? What sort of bore needed from the old oil pressure outlet? Also, can the oil pressure pipe be taken somewhere else, or perhaps somewhere off the filter housing? Do you have any pictures?
Kindest
Tim