21-03-2019, 04:55 PM
Thanks Mike.
The way Austin varied its castings, it would be sensible to check three bearing 'cases for mounting height, and not assume that they are automatically low frame.
I was going to suggest you could tell by the position of the "stop" on the starter bulge, but this may not apply to later castings.
Cheers
Simon
The way Austin varied its castings, it would be sensible to check three bearing 'cases for mounting height, and not assume that they are automatically low frame.
I was going to suggest you could tell by the position of the "stop" on the starter bulge, but this may not apply to later castings.
Cheers
Simon