14-03-2019, 05:50 PM
Simon, I can let out more cable at the cross shaft coupling and this will probably give me more travel at the cam, but with cable adjusters previously being fitted I'm thinking it may be best to replace the cables.
I've noticed the brake pedal rod is also rusty so I may as well replace that as well.
The wheel studs are loose, so they may as well be changed, these studs are riveted to the hub do you know the procedure to replace? Not much information in the red book.
Many thanks.
I've noticed the brake pedal rod is also rusty so I may as well replace that as well.
The wheel studs are loose, so they may as well be changed, these studs are riveted to the hub do you know the procedure to replace? Not much information in the red book.
Many thanks.