01-03-2019, 03:45 PM
(This post was last modified: 01-03-2019, 04:14 PM by Bob Culver.)
The pre Girling system is very basic and angle increases with wear. Skimmed drums do not assist. Must be no risk of cams going too far and wedging on. Cams are individual. The direction of the cotter influences angle. Otherwise as you assume.
If you can establish or figure where the lever lies in the fully off position free of the cable, will indicate if assembled correct with correct cam.
If you can establish or figure where the lever lies in the fully off position free of the cable, will indicate if assembled correct with correct cam.