24-11-2018, 08:24 PM
Colin ,
when you come to examine the original rod little ends I would be very surprised if they are not worn.
This is due to the two oil holes drilled from underneath on the thrust side of the little end.
All of the ones I have measured have been worn and as the top of the rod is so thin oversize pins are not really an option.
when you come to examine the original rod little ends I would be very surprised if they are not worn.
This is due to the two oil holes drilled from underneath on the thrust side of the little end.
All of the ones I have measured have been worn and as the top of the rod is so thin oversize pins are not really an option.