The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Switching from 6V to 12V, voltage regulator?!
#28
I agree with a lot of what has been said. A properly sorted 6v system can give results equal in most respects to a properly sorted 12v system. Where 12v wins is on lighting: if you want to use 36watt headlamp bulbs that will consume 12 amps on a 6v system, overloading any Austin Seven dynamo if it is setup to balance the load, and this can only be bad news. On 12v 36 watt headlamps take only 6 amps, leaving enough output to operate other things without problems. If you don't use the car extensively at night a good 6v system can be fine. I have chosen 12v for my Ulsteroid,but I keep the mag engine Chummy on 6v.
Reply


Messages In This Thread
RE: Switching from 6V to 12V, voltage regulator?! - by Robert Leigh - 22-10-2018, 10:39 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)