27-01-2021, 11:08 AM
8D5FA02A-AD9D-4432-AC33-426C7ED56B66.jpeg (Size: 67.68 KB / Downloads: 339)
D3EB8D09-F4B9-4BF8-AD2B-EFA76B19A774.jpeg (Size: 38.52 KB / Downloads: 339)
Sitting here summoning up the courage to start cutting out!
My plan is to be able to have these two pieces joined together
along the line of the rear hood stick.
The front hood stick will insert into a recess in the hood fabric and
will have Velcro along the back of that hood stick to secure the hood
fabric and hold down the small storm flap in front of the windscreen.
Not decided just yet about webbing straps though Tom Abernethy has
kindly sent some sketches of how he does his hoods.
Got some hefty stainless steel liftadot pegs from the USA and will
double the fabric where they are mounted around the rear edge as
Also suggested by Tom.
Once cut will try fit the pieces to double check alignments
Regards
Bill G
Based near the Scottish Border,