01-07-2019, 10:13 AM
(This post was last modified: 01-07-2019, 11:08 AM by AllAlloyCup.)
Engine coming out today!! Suspect loose flywheel...
After accidentally caught the throttle with my braking foot.
Must get narrower shoes.
In between times have started to plan a tonneau cover using
Nylon sailcloth to make templates.
Using a soldering iron to make temporary holes for the lift a dots.
Now to try to figure out how to neatly cover the steering wheel....
Anyone with a neat tonneau, please put up a photo...
I bought a big Necchi Industrial machine a few weeks back
and bought a new drive belt and some piping feet for it.
Planning to use old stock navy Silver Cross Pram hooding
For the Tonneau, it’s a nice colour and texture and since the A7 chassis is
off a Pram Hood Chummy , it’s highly appropriate!
Inspired by the Great British Sewing Bee I am
Looking forward to tackling the Tonneau but whether I
Can graduate to a hood is another matter.
Normal service will be resumed as soon as possible on this thread :-)
Regards
Bill
Based near the Scottish Border,