30-05-2019, 01:46 PM
(This post was last modified: 30-05-2019, 03:23 PM by AllAlloyCup.)
Still working on the wiring circuits and also the exhaust pipe, but
made steady if somewhat slow progress.
Decided to fit small bullet shaped motorcycle indicator housings on
the front wing supports. They are very compact housings so had to take a Dremel
To the orange LED bulbs I’d bought. After some modifications the LED fitments
Are now installed and working, using an electronic flasher unit controlled from a
period trafficator switch mounted on the dashboard.
Also fettled the downpipe and it’s now ready for having the mating flange brazed on.
Here’s hoping the Rad shell is delivered on Sunday as promised!!
I’m taking the TR3A to the BVAC Thirlestane Castle Rally so the shell will need
To fit inside the rather tight cabin as I’ve still got the steel hardtop fitted.
Regards
Bill G
Based near the Scottish Border,