25-05-2019, 01:42 PM
Two steps forward , one back is the rule when doing the “shakedown runs”
Not called shakedown trials for nothing!
Regards
Bill G
Ps finished forming the shapely exhaust downpipe
fitting it to match the manifold and the silencer took
Longer than bending it.
It has to dodge the “hoop” so ended up with 3 -4 bends
formed with a very large hydraulic bender.
Now to get the steel flange brazed to the copper pipe.
Not called shakedown trials for nothing!
Regards
Bill G
Ps finished forming the shapely exhaust downpipe
fitting it to match the manifold and the silencer took
Longer than bending it.
It has to dodge the “hoop” so ended up with 3 -4 bends
formed with a very large hydraulic bender.
Now to get the steel flange brazed to the copper pipe.
Based near the Scottish Border,