25-03-2019, 10:10 AM
(This post was last modified: 25-03-2019, 10:13 AM by AllAlloyCup.)
Hi Erich
That pipe was my first attempt I may have to remodel it.
Plus there seems to be some disquiet about gravity fed SU’s
on the Forum but I thought I’d try it anyway rather than
plumb in a 6v electric pump. I’ve bought a vintage hand air pump
Which I could use to pressurise the tank and might try that fitted
in the dash, which is what Ulster’s used?
See the Scarlett O’Hara thread on that topic.
Finding an old low pressure gauge seem to be the main problem
but repro ones are available for about £100.
Getting close to finishing all the bodywork which
will be a major milestone. Snagging Led wiring just now!
Hope your own projects are doing well.
Regards
Ps the loop was an “anti vibration” measure, see Ruairidh ‘s for
how I should have made it!
Bill G
That pipe was my first attempt I may have to remodel it.
Plus there seems to be some disquiet about gravity fed SU’s
on the Forum but I thought I’d try it anyway rather than
plumb in a 6v electric pump. I’ve bought a vintage hand air pump
Which I could use to pressurise the tank and might try that fitted
in the dash, which is what Ulster’s used?
See the Scarlett O’Hara thread on that topic.
Finding an old low pressure gauge seem to be the main problem
but repro ones are available for about £100.
Getting close to finishing all the bodywork which
will be a major milestone. Snagging Led wiring just now!
Hope your own projects are doing well.
Regards
Ps the loop was an “anti vibration” measure, see Ruairidh ‘s for
how I should have made it!
Bill G
Based near the Scottish Border,