01-03-2019, 05:21 PM
D3123E51-C35B-4405-BDC5-467C8E0BE20E.jpeg (Size: 94.6 KB / Downloads: 176)
F73FFB36-731A-4229-BB60-FBEE3F8C054B.jpeg (Size: 96.59 KB / Downloads: 174)
Wings came back from the welder looking much better and
He even did most of the dressing of the welds so just a little work with a
palm sander should sort it out, before finishing with the Scotchbrite and
Nyalic. They are all pre-drilled so should just bolt on easily when the lacquering is finished.
Thinking I may need some stone protection under the front wings? Anyone with alloy wings care to comment?
Regards
Bill G
Aka AllAlloyCup
Based near the Scottish Border,