29-01-2019, 04:42 PM
This morning managed to install the sidelight wiring looms
And clipped them to the wing supports. Each side has a Lucas 6 way wiring junction box
On the inside of the flitch plates which connects these sub looms to the main wiring, laid along the top of the flitch plates . The Lucas boxes also provide wiring to the headlamps.
Also made a steel cross brace along the back of the radiator,
that both headlamps are screwed into.
The new old stock CAV headlamps have minimal adjustment on the mounting
stalks so I will have to make pairs of wedges to align the headlamps
in a forward direction.
Hoping to finish the bonnet clips this week, then the radiator shell
can go to the platers . Must get back on to
final engine assembly, head etc and clutch build.
Still can’t complain about progress in January ,
roll on February which should see the start of final assembly
starting at the back and working forward.
Regards
Bill G
Aka AllAlloyCup
Based near the Scottish Border,