17-01-2019, 06:44 PM
Hi Ruairidh,
Thanks for the kind comments. My first job
was as an instrument Technician for 6 years,
and am still using the tools kindly
given to me by Prof Jennett , ( a neuro- surgeon)
Who I worked for at Killearn/ and at SGH Govan.
I’ve made up some alloy P-clips
to carry the 7 core cable I’ve run to the inside
Of the boot, running along the lower NS body.
I made a separate loom carried on the
rear no plate and it connects to this 7 core
cable in the floor of the boot via a 5- bullet connector.
I’ve got 2x brake/sidelights/no plate illumination plus 2 x indicators
Mounted on the rear number plate.
Plus because I’m using LEDs, I’m taking a wired earth wherever
I’m running cable.
I’m trying to keep wiring integrated with the body tub
Rather than have any on the chassis.
Makes everything easier for dismantling
Should I opt to paint the body off the car at some future time.
Bill G
Thanks for the kind comments. My first job
was as an instrument Technician for 6 years,
and am still using the tools kindly
given to me by Prof Jennett , ( a neuro- surgeon)
Who I worked for at Killearn/ and at SGH Govan.
I’ve made up some alloy P-clips
to carry the 7 core cable I’ve run to the inside
Of the boot, running along the lower NS body.
I made a separate loom carried on the
rear no plate and it connects to this 7 core
cable in the floor of the boot via a 5- bullet connector.
I’ve got 2x brake/sidelights/no plate illumination plus 2 x indicators
Mounted on the rear number plate.
Plus because I’m using LEDs, I’m taking a wired earth wherever
I’m running cable.
I’m trying to keep wiring integrated with the body tub
Rather than have any on the chassis.
Makes everything easier for dismantling
Should I opt to paint the body off the car at some future time.
Bill G
Based near the Scottish Border,