19-12-2018, 09:45 PM
(This post was last modified: 19-12-2018, 09:47 PM by Tony Press.)
(19-12-2018, 11:35 AM)AllAlloyCup Wrote: Hi Mike,
Thanks for solving this mystery!
See EBay item 392195643465
Which currently wrongly listed as a
Coil switch panel it has the M and D
And the appropriate wiring on the back
as you described .
Regards
Bill G
Well another 'new' bit of Austin Seven history- this Lucas SM 3 1/2 (or is it SM 4) panel - the rear connections are a mixture of the Magneto panel SM 3 and Coil panel SM 5 and the coil connection is clearly marked IGN .
It is possible to wire an SM 3 for coil but a lot better to use this (rare? ) panel.
You asked-
Also does anyone sell the flate plate fuses fitted to the other posts within the cut out?
We discussed this on the forum recently - no one suggested a supplier, the answer was to use standard house fuse wire.