10-10-2018, 11:36 AM
Hi Peter,
This alloy skin was made away from the car body
so it is temporarily screwed to the base to allow for
Adjustments.
I’m about to remove the skin from the frame and then adjust a few things,
Plus the skin itself may need a small amount of stretching and shrinking..
I have a plan to seal the edge and finish it neatly but am
Waiting on some materials before I finally commit to
Fitting and fastening it all permanently.
As it’s a”Special” rather than a pure replica
I have some degrees of freedom with my own
Design.
Bill
This alloy skin was made away from the car body
so it is temporarily screwed to the base to allow for
Adjustments.
I’m about to remove the skin from the frame and then adjust a few things,
Plus the skin itself may need a small amount of stretching and shrinking..
I have a plan to seal the edge and finish it neatly but am
Waiting on some materials before I finally commit to
Fitting and fastening it all permanently.
As it’s a”Special” rather than a pure replica
I have some degrees of freedom with my own
Design.
Bill
Based near the Scottish Border,