28-07-2018, 11:52 PM
(This post was last modified: 29-07-2018, 12:14 AM by Bob Culver.)
The diagram from the Woodrow book is the 35A. The same for a 35M would be very useful.
I have my own crude sketches for the 35M but variations have been encountered and I am not certain of the original. There is a slinger on the outside of the bearing and (sometimes?) also on the inside, the inner one operates within a cup shaped contain which spaces the bearing and which retains a felt seal on the inner side.
Hopefully someone will improve on this.
Incidentally I have a diagram from somewhere labelled p143 Illustration NG which same as 35A above but showing washers both sides of the bearing.
I have my own crude sketches for the 35M but variations have been encountered and I am not certain of the original. There is a slinger on the outside of the bearing and (sometimes?) also on the inside, the inner one operates within a cup shaped contain which spaces the bearing and which retains a felt seal on the inner side.
Hopefully someone will improve on this.
Incidentally I have a diagram from somewhere labelled p143 Illustration NG which same as 35A above but showing washers both sides of the bearing.