Joined: Jul 2022 Posts: 2 Threads: 1
Reputation:
0
Location: Glasgow
Car type: Austin Seven Box Saloon 1931
@page { size: 21cm 29.7cm; margin: 2cm } p { line-height: 115%; margin-bottom: 0.25cm; background: transparent }
Hi, does anyone know the Standard Thread of the fixed ignition point on a DJ4 Distributor. Information available suggests BA sizes were in use in the 1930s. Thanks in anticipation.
Joined: Aug 2017 Posts: 704 Threads: 12
Reputation:
4
I use a BA Spanner on my points.
I suspect its a 4 BA but I would need to confirn it.
0 BA is a large thread size and the numbers go up as the diameter goes down.
Joined: Oct 2017 Posts: 1,395 Threads: 45
Reputation:
7
The early fixed contact is 4 BA and the late fixed contact is 3 BA.
Joined: Jul 2022 Posts: 2 Threads: 1
Reputation:
0
Location: Glasgow
Car type: Austin Seven Box Saloon 1931
Many thanks to everyone for their response. It is much appreciated.
Joined: May 2018 Posts: 46 Threads: 12
Reputation:
0
If anyone needs any BA Taps and Dies I have plenty spare, I will swap for 7 bits too
