03-12-2017, 12:52 PM
I learnt the hard way to cut the side tubes, make a sleeve, bolt the diff, half shafts and hubs together and tack it together using the high precision "weld where it touches" approach.
The following warnings occurred: | ||||||||||||
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.30 (Linux)
|
Dimensions SWB Ulster
|
03-12-2017, 12:52 PM
I learnt the hard way to cut the side tubes, make a sleeve, bolt the diff, half shafts and hubs together and tack it together using the high precision "weld where it touches" approach.
03-12-2017, 01:34 PM
(03-12-2017, 12:52 PM)Charles P Wrote: I learnt the hard way to cut the side tubes, make a sleeve, bolt the diff, half shafts and hubs together and tack it together using the high precision "weld where it touches" approach. Me too Charles. I also offer up the tacked up axle to the springs previously fitted into the chassis frame to make sure all the eyes line up before making things permanent. Steve |
« Next Oldest | Next Newest »
|