10-03-2018, 09:47 PM
(This post was last modified: 10-03-2018, 09:52 PM by Zetomagneto.)
[attachment=2406 Wrote:I Erich pid='7929' dateline='1520619289']I've got R47 headlamps and would like to hook up the running lights. The issue is that there is only the outer case for the running lights but no internal spring loaded fitting. Can anyone point me in the direction of a supplier for these internal bits? Any help is greatly appreciated.
Erich In Seattle
Hello Eric, I had the same problem.I bought some bulb holders, removed the plastic terminal blocks, removed the lugs on the outer diameter, and milled flats across them by the terminals.
Hope the photos help.Best Wishes Gene
(10-03-2018, 09:47 PM)Zetomagneto Wrote:Here are the bulb holders: https://www.autoelectricsupplies.co.uk/p...ategory/81(09-03-2018, 07:14 PM)I Erich Wrote: I've got R47 headlamps and would like to hook up the running lights. The issue is that there is only the outer case for the running lights but no internal spring loaded fitting. Can anyone point me in the direction of a supplier for these internal bits? Any help is greatly appreciated.
Erich In Seattle
Hello Eric, I had the same problem.I bought some bulb holders, removed the plastic terminal blocks, removed the lugs on the outer diameter, and milled flats across them by the terminals.
Hope the photos help.Best Wishes Gene