15-08-2021, 03:57 PM
(This post was last modified: 15-08-2021, 04:01 PM by Ruairidh Dunford.)
The Cup engine has now done around 1000 miles and is bedding in quite nicely.
I used silicone base, valve chest cover and sump gaskets on this engine and took a photo this morning to show how they are doing in use, will keep the post updated.
Surfaces were spotlessly cleaned and tightened down, left 48 hours, and re-tightened.
They have not been touched since.
I used silicone base, valve chest cover and sump gaskets on this engine and took a photo this morning to show how they are doing in use, will keep the post updated.
Surfaces were spotlessly cleaned and tightened down, left 48 hours, and re-tightened.
They have not been touched since.