15-10-2017, 03:46 AM
Today I decided to fit the radiator support/bonnet gutter, and work out where I wanted my Rist horn mounted, to make it work I needed a new bracket for the Horn. So out with the kelloggs CAD program, transfer this onto metal to produce two opposite handed steel plates, a couple of spot welds joined them, a quick blast of self etch primer and trial fit to see if it worked.
DSC06292.JPG (Size: 228.29 KB / Downloads: 1,247)
DSC06296.JPG (Size: 203.81 KB / Downloads: 1,240)
DSC06299.JPG (Size: 264.99 KB / Downloads: 1,238)
Suitably pleased with efforts, open beer fridge and relax
DSC06292.JPG (Size: 228.29 KB / Downloads: 1,247)
DSC06296.JPG (Size: 203.81 KB / Downloads: 1,240)
DSC06299.JPG (Size: 264.99 KB / Downloads: 1,238)
Suitably pleased with efforts, open beer fridge and relax
Black Art Enthusiast