12-09-2019, 09:02 PM
Hi Pete,
I found that the solenoid to lift the arm was taking so much current that the voltage dropped below an acceptable level. The LEDs wouldn't work reliably. It wasn't an earthing problem but perhaps the loom wiring was inadequate. I have added a voltage booster to the LED circuit only - a real faff but the result is bright, visible, reliable flashers.
Peter.
I found that the solenoid to lift the arm was taking so much current that the voltage dropped below an acceptable level. The LEDs wouldn't work reliably. It wasn't an earthing problem but perhaps the loom wiring was inadequate. I have added a voltage booster to the LED circuit only - a real faff but the result is bright, visible, reliable flashers.
Peter.