The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Vacuum Wiper - How to connect to inlet manifold, where to put the vacuum pipe
#22
   

This is a picture of my car which is as it was when I got it. This is a March '34 car. It definitely had a vacuum wiper motor as it came with it and the inside bits of the pipe were still there. 

There is no hole near the glovebox though, other than the one the choke wire comes though lower down. You can see others are used for the original wiring, speedo cable and oil pressure pipe. There is another hole behind the head / block on the bulkhead but it looks like it was chewed out, so I'm suspecting not orignal.
Reply


Messages In This Thread
RE: Vacuum Wiper - How to connect to inlet manifold, where to put the vacuum pipe - by Geoff101 - 19-08-2019, 09:19 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)