10-07-2019, 04:37 PM
(This post was last modified: 10-07-2019, 08:27 PM by Duncan Grimmond.)
I've made different mounts for aero screens using 3mm ali sheet. It can be a simple triangular shape with a folded flange to bolt down but it needs a large thick washer the take up the slack left by the thick mounting castings. I prefer the mounting to be across the line of the screen, in line with the direction of travel and as there is no folding main windscreen to allow for, it gives a more rigid mount which will not distort the scuttle if you want to adjust the angle of the screen.
I'll try to find some pics.
I'll try to find some pics.