03-07-2019, 06:27 PM
The curious case of the glimmering ignition light. Over the last couple of months or so, the ignition light had started to glimmer even when the dynamo was charging well. It was the same wether on 1/2 or full charge. I put it down to a dynamo problem, but the other day, the cutout was sluggish to 'pull in' . I cleaned the cutout contact faces by sliding some paper back and forth between the contacts, leaving a dirty trace on the paper.
Hey presto, cutout working as it should and no glimmering ign light. - Happy boy again.
Hey presto, cutout working as it should and no glimmering ign light. - Happy boy again.