The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Oil filler neck
#14
Flexible curtain rod, the stuff Beloved uses for hanging lace curtains and a battery drill are very handy things for cleaning out passages in blocks, heads, manifolds etc. You could use a bit of old bicycle brake cable outer coiled cable if you stripped the plastic off. I ground the end smooth on a grindstone so it had no sharp buts to hook on anything going into corners

Take a bit of time to inveigle (now there's a big sticky word like marmalade) the springy coiled wire around obstacles inside blocks etc, but is well worth it - NOT for radiator tanks as the rotating whipping of the flexible rod will bend the ends of the tubes closed.

Use in combination with a compressor & air gun and you will be quite surprised what is lurking in a seemingly clean block

Aye
Greig
Reply


Messages In This Thread
Oil filler neck - by PedigreeChummy - 03-07-2019, 01:46 PM
RE: Oil filler neck - by Michael D - 03-07-2019, 02:01 PM
RE: Oil filler neck - by bob46320 - 03-07-2019, 02:34 PM
RE: Oil filler neck - by Chris KC - 03-07-2019, 02:47 PM
RE: Oil filler neck - by PedigreeChummy - 03-07-2019, 03:03 PM
RE: Oil filler neck - by Reckless Rat - 03-07-2019, 03:07 PM
RE: Oil filler neck - by Chris KC - 03-07-2019, 03:22 PM
RE: Oil filler neck - by PedigreeChummy - 03-07-2019, 03:26 PM
RE: Oil filler neck - by nrzam - 03-07-2019, 03:47 PM
RE: Oil filler neck - by "Slack Alice" Simon - 03-07-2019, 03:59 PM
RE: Oil filler neck - by PedigreeChummy - 03-07-2019, 05:50 PM
RE: Oil filler neck - by "Slack Alice" Simon - 03-07-2019, 07:21 PM
RE: Oil filler neck - by Ian Williams - 03-07-2019, 07:32 PM
RE: Oil filler neck - by Greig Smith - 04-07-2019, 05:23 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)