02-07-2019, 10:26 PM
A new arm would certainly bring peace of mind. If you plan to keep it have it crack tested on the inside radius (to be frank, I'm not a huge fan of dye penetrant crack test kits, close inspection with a magnifying glass is nearly as good).
I think given the bend, the groove and the corrosion I would keep an eye out for a better drag link second hand or even fabricate a new one from some steel tube.
I think given the bend, the groove and the corrosion I would keep an eye out for a better drag link second hand or even fabricate a new one from some steel tube.