26-04-2019, 02:35 AM
Hi All,
On my Ulster Rep, with a SWB chassis, my rear track is 3'7" making it a later axle. The front is a proper 3'4". The CWP housing is the Type 3 with the bolt up torque tube. I have semi Girling brakes. Would it be possible or even desirable to change the axle tubes to the shorter type, keeping the semi Girling brakes and Type 3 CWP housing. How would this be accomplished? The reason I ask is that the tyres sit near the outer edge of the wings and look rather unbalanced that way.
Sorry for the newbie question...still learning.
Erich in Seattle
On my Ulster Rep, with a SWB chassis, my rear track is 3'7" making it a later axle. The front is a proper 3'4". The CWP housing is the Type 3 with the bolt up torque tube. I have semi Girling brakes. Would it be possible or even desirable to change the axle tubes to the shorter type, keeping the semi Girling brakes and Type 3 CWP housing. How would this be accomplished? The reason I ask is that the tyres sit near the outer edge of the wings and look rather unbalanced that way.
Sorry for the newbie question...still learning.
Erich in Seattle