15-03-2019, 08:58 PM
(This post was last modified: 17-03-2019, 10:08 AM by Colin Morgan.)
When I put my Ruby back on the road, the horn was just about the only thing that I couldn't get to work well enough for the MOT. So I invested in a temporary 6v moped/motorcycle horn - this was loud enough to do the job. Later I learned that the old 6v horn could be made to work again by adjusting the 'points' in it. This I have done, and it now produces a reasonable note. However, I haven't got around to fitting it. Meanwhile, a couple of other duff original 6v horns have come my way over the years - these were also made to work with a bit of fettling and adjustment. However, I think it is more important than originality to ensure that any horn fitted on the car is loud enough - for when you need it.
Colin
Colin