The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.28 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval



Austinsevenfriends › Austin Seven Friends Forum › Forum chat... v
Nippy head gasket

Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Linear Mode
Nippy head gasket
John Mason Offline
Lifetime lover of car tinkering
*****
Joined: Dec 2017 Posts: 1,138 Threads: 67
Reputation: 8
Location: Nottinghamshire. Robin Hood County
Car type: Austin Ruby Mk1 1935
#6
01-03-2019, 02:34 PM
That drill guide can also be used in conjunction with the head to drill out sheared off head studs as per Illistrated in Woodrow. In Woodrow it shows a pilot hole being drilled first with a similar guide but for a smaller drill. However if you use the larger drill first just to mark the centre the pilot hole can be drilled without a guide then going back to the larger guide to accurately drill out the stud keeping it straight.

John Mason
Would you believe it "Her who must be obeyed" refers to my Ruby as the toy.
Reply


Messages In This Thread
Nippy head gasket - by Scarlet O'Hara - 28-02-2019, 02:15 PM
RE: Nippy head gasket - by Chris KC - 28-02-2019, 03:21 PM
RE: Nippy head gasket - by dickie65 - 28-02-2019, 11:50 PM
RE: Nippy head gasket - by Ruairidh Dunford - 01-03-2019, 12:18 AM
RE: Nippy head gasket - by Scarlet O'Hara - 01-03-2019, 12:01 PM
RE: Nippy head gasket - by John Mason - 01-03-2019, 02:34 PM
RE: Nippy head gasket - by Timothy P - 01-03-2019, 02:42 PM
RE: Nippy head gasket - by Chris KC - 01-03-2019, 06:05 PM
RE: Nippy head gasket - by dickie65 - 04-03-2019, 09:35 PM
RE: Nippy head gasket - by Phil Kingdom - 04-03-2019, 10:46 PM
RE: Nippy head gasket - by Paul N-M - 05-03-2019, 08:39 AM
RE: Nippy head gasket - by Zetomagneto - 05-03-2019, 10:16 AM
RE: Nippy head gasket - by Scarlet O'Hara - 05-03-2019, 11:05 AM
RE: Nippy head gasket - by Chris KC - 05-03-2019, 11:33 AM
RE: Nippy head gasket - by Colin Reed - 05-03-2019, 08:19 PM
RE: Nippy head gasket - by Bruce Nicholls - 05-03-2019, 09:51 PM
RE: Nippy head gasket - by Paul N-M - 07-03-2019, 05:11 PM
RE: Nippy head gasket - by Colin Reed - 07-03-2019, 07:48 PM
RE: Nippy head gasket - by Bob Culver - 07-03-2019, 08:36 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)