05-02-2019, 11:57 PM
(05-02-2019, 11:34 PM)jansens Wrote: Vague muffling is good enough!Back to the good advice and measurements on making your own - I've been led to believe that the Longbridge factory made (or had made) in the latter days of Ulster production - the ends flat, not compound-curved. Can't prove that statement, but some photos seem to show the flat ends - worth checking as much easier/quicker to make. Look for photos of the later versions, where the back rest is straighter than the earlier curved ones. Good Luck, Cheers, Bill