05-12-2018, 06:45 PM
the scuttle tank on my saloon was holed through rust on the back (the bit facing the scuttle). I cleaned, and put a gob of plastic padding liquid metal over the hole.
That cured the leak. But I also subsequently used a slosh sealer to isolate the epoxy from the fuel.
That was 20years ago in the spring. I run no filter and generally only have issues with dirt when I have introduced them from cans.
That cured the leak. But I also subsequently used a slosh sealer to isolate the epoxy from the fuel.
That was 20years ago in the spring. I run no filter and generally only have issues with dirt when I have introduced them from cans.