Finally got the dynamo back together.
Tested for continuity the field coils.
Test armature segments
BUT ONLY GETTING 2.5volts at about 1000 rpm
Any ideas ?
Further to my last post.
I only have one wire from the field coils.
In the diagram there is a connection to the 3rd brush ?
Tested for continuity the field coils.
Test armature segments
BUT ONLY GETTING 2.5volts at about 1000 rpm
Any ideas ?
Further to my last post.
I only have one wire from the field coils.
In the diagram there is a connection to the 3rd brush ?